D'Oro

About

A more intricate version of the Venetian inspired ‘Fifteenth’, this pattern adds an evocative architectural appearance to any space. Gaze beyond this design and you almost expect to see the murky waters of a Venetian canal pass below.

Design Registration No. 334144

Starting from

$145 - 330/m2
Order Now
Delivery Australia-Wide

Design Type

Design Type
This design scales to the size of your DecoGlide™.

Fixing Methods

Face Mounted

Illustration of Face Mounting

Face mounting is the recommended mounting method. The Track is fitted to the face of the wall above the opening. Expand...

It is then fixed at either side of the opening. Face Mounting is suitable for when there is sufficient space above the window opening to mount the track on the face of the wall, and to accommodate the angle brackets. Illustration of Face Mounting

It is suitable when the opening has an architrave (a timber trim around the opening) or without an architrave. When the opening has no architrave, the track is mounted with the bottom of the track level with the top of the opening.

With an architrave, the track will be mounted with the top of the track level with the top of the architrave. With an architrave, the screens are designed to cover the architrave entirely, both in height and width. This provides the neatest and most aesthetically pleasing result.

The tracks are mounted to the wall using angle brackets. The tracks and brackets will arrive fully assembled, for you to install as a single unit. For Face Mounted allow 110mm clearance above the opening head or the architrave, whichever is relevant. This clearance is to accommodate the angle brackets used for fixing the tracks to the wall. Please ensure you have sufficient space before selecting this type of fitting method.

Recess Mounted

Illustration of Recess Mounting

The Track is fitted to the Opening Head. Expand...

Recess Mounting is suitable when the opening is big enough to accommodate a minimum of two screens, and when the door/window is set far enough within the wall to allow the tracks to be mounted along the opening head. This is typically only the case with walls that are brick veneer or some other masonry type of construction. For a single track, we recommend no less than 50mm from the face of the door/window frame to the edge of the opening. For multiple tracks, the distance necessary must also be multiplied. Please ensure you have sufficient space before selecting this type of fitting method.

For two screens, we recommend no less than 70mm from the face of the door/window frame to the edge of the opening. For each additional track, another 35mm is required. Please ensure you have sufficient space before selecting this type of fitting method.

In the Recess Mounted configuration, depending on the number of screens, the head track will either be supplied in two parts, to be separated by a gap, or will come in a single segment, with a gap either side to the opening. This is to allow the screens to be slid onto the track via these gap. There will be no gap between the screens, as they are designed to overhang the gap and meet.

Stacking

Standard

Illustration of Stacking

The screens stack within the window opening. Expand...

The default length of the track is slightly larger than the size of the opening. This means that the screens can be stacked either to one side of the opening, or to both sides of the opening, depending on the size of the opening and number of screens. The opening will be partially covered in this configuration by the screens.

Track Extension

Illustration of Track Extension

The screens stack on the wall adjacent to the opening. Expand...

If you would prefer to have the screens stack beyond the window opening, you can choose to have the 'track extension'. This will mean that the track extends beyond the window opening. For a single screen, the track extends to one side of the opening; for two or more screens, the track extends to either side either of the opening. You will be able to open the opening completely with the track extension.

Track Extension is an option only available for Masonry Walls, as we cannot guarantee that with stud walls there will be a suitable fixing point in the required location.

 
Order Process

* Required Fields

Overview
Configuration/
Panels
Dimensions
Track
Terms & Conditions

 
$144.76